美国Glas-Col铝制加热套保护罩/防护罩

简要描述：

美国Glas-Col铝制加热套保护罩/防护罩PONCHO SAFETY SHIELDS
PONCHO SAFETY SHIELDS
The Poncho Safety Shield covers a flask in a Series TM or STM mantle, greatly improving operating safety.

更新时间：2023-11-11

访问量：1240

厂商性质：经销商

生产地址：

在线询价联系我们

产品介绍：

美国Glas-Col铝制加热套保护罩/防护罩PONCHO SAFETY SHIELDS

雨披安全盾牌

Poncho安全罩在系列TM或STM地幔中覆盖了一个烧瓶，大大提高了操作安全性。只有在使用了Poncho安全盾牌，并且在12升和更大的尺寸下，可以用惰性气体(如氩气)净化斗篷和斗篷，才能在系列STM mantles中处理易燃液体。除了减少火灾危险，雨披护盾还可以保护烧瓶免受诸如螺丝刀或钳子之类的坠落物体的伤害，保护人员免受飞行玻璃的伤害

液体如果烧瓶在高真空蒸馏或爆炸中内爆，并作为一种有效的绝缘体。Poncho有两个玻璃观测端口，允许在仍提供保护的情况下加热材料。盾牌上有一个密封圈和一个不扩散条约清洗的港口(1 / 8大小的P1300和更小的和3 / 4”的P1400和更大的)。下图所示的Ponchos是单颈烧瓶，已经准备好使用。多颈烧瓶的Ponchos可能需要在实验室进行zui后的试穿。

美国Glas-Col铝制加热套保护罩/防护罩PONCHO SAFETY SHIELDS

PONCHO SAFETY SHIELDS

The Poncho Safety Shield covers a flask in a Series TM or STM mantle, greatly improving operating safety. Flammable liquids should be processed in Series STM mantles only if a Poncho Safety Shield is used and, in sizes 12-liter and larger, the mantle and Poncho can be purged with an inert gas such as argon. In addition to reducing fire hazards, the Poncho Shield also protects flasks from falling objects such as screwdrivers or pliers, protects personnel from flying glass and

liquid if flask implodes under high vacuum distillation or explodes, and serves as an efficient insulator. The Poncho has two glass observation ports, allowing the material being heated to be seen while still affording protection. The shield is furnished with a sealer ring and an NPT purge relief port (1/8 for sizes P1300 and smaller and 3/4” for P1400 and larger).Ponchos shown in chart are for single-neck flasks and are shipped ready for use.Ponchos for multiple-neck flasks may require final fitting in lab.

Note

When using flasks with additional or modified necks, neck location and tubulation length are important. To reduce fitting problems, side necks should not be lower than halfway between equator and top center neck. Side necks should be nearly vertical, if possible, and necks must project through Poncho far enough to allow makeup of taper or ball joints (see chart). For larger sizes, please consult the factory.