美国KIMBLE、KONTES尖底螺口匀浆器 带盖

3ml 5ml 15ml美国KIMBLE、KONTES尖底螺口匀浆器 带盖
885350-21、885350-22、885350-23

极其有效的磨床,DUALL®结合圆锥和圆柱表面在一个杵和管。这些独立的区域在圆锥截面的圆锥截面和zui终同质化中执行初始磨削的双重作用。

·设计创新在885450年我们的流行DUALL®组织研磨机

·PTFE /橡胶衬里的酚醛螺旋盖封盖允许离心或储存均质不转移

·更换部件可用，*可互换

·pestle与tube之间的间隙为0.004“至0.006”

由33个膨胀、低硼硅酸盐玻璃制成，符合USP型和ASTM E438型，I型，*要求

3ml 5ml 15ml美国KIMBLE、KONTES尖底螺口匀浆器 带盖

磨砂玻璃杵

附有PTFE内垫的螺旋盖，可以在研磨后直接离心货储存而不需要更换容器

SCREW CAPS

An extremely efficient grinder, the DUALL® combines both conical and cylindrical surfaces on a single pestle and tube.  These separate areas perform the dual functions of initial grinding in the conical section and final homogenization in the cylindrical section.

·         Design innovation on our popular 885450 DUALL® tissue grinders

·         PTFE/rubber-lined phenolic screw cap closure permits centrifugation or storage of homogenates without transfer

·         Replacement components are available and compley interchangeable

·         Clearance between pestles and tubes is 0.004” to 0.006”

• Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

3ml 5ml 15ml美国KONTES尖底螺口匀浆器 进口KIMBLE螺口带盖玻璃匀浆器

3ml 5ml 15ml美国KONTES尖底螺口匀浆器 进口KIMBLE螺口带盖玻璃匀浆器